联系人：刘女士
手 机：18913545517
座 机：0512-57878076
网 址：eqots.com
地 址：苏州昆山市陆家镇菉溪路23号
| eqo Building Materials Testing (CMA Qualification Capabilities) – (Table 1) | ||||
| serial number | Metrological certification testing items | Detect items or parameters | ||
| serial number | Name/Parameter | Standard/Specification Clauses | ||
| 1 | Waterproofing membrane | 1 | Elastomer modified asphalt waterproofing membrane | Elastomer modified asphalt waterproofing membrane GB 18242-2008 |
| 2 | Plastomer modified asphalt waterproofing membrane | Plastomer modified asphalt waterproofing membrane GB 18243-2008 | ||
| 3 | Self-adhesive polymer modified asphalt waterproofing membrane | Self-adhesive polymer modified asphalt waterproofing membrane GB 23441-2009 | ||
| 4 | Pre-laid waterproofing membrane | Pre laid waterproofing membran eGB/T 23457-2017 | ||
| 5 | Polymer waterproof material | Polymer waterproof materials Part 1 Sheet GB/T 18173.1-2012 | ||
| 6 | PVC waterproofing membrane | PVC waterproofing membrane GB 12952-2011 | ||
| 7 | Thermoplastic polyolefin waterproofing material | Thermoplastic polyolefin waterproofing material GB 27789-2011 | ||
| 2 | Waterproof coatings | 8 | Polyurethane waterproof coating | Polyurethane waterproof coatin gGB/T 19250-2013 |
| 9 | Polymer cement waterproofing coatings | Polymer cement waterproof coatin gGB/T 23445-2009 | ||
| 3 | wall material | 10 | Sintered ordinary bricks | Sintered ordinary brick GB/T 5101-2017 |
| 11 | Autoclaved aerated concrete blocks | Autoclaved aerated concrete blocks GB/T 11968-2006 | ||
| 12 | Autoclaved sand-lime bricks | autoclaved sand-lime brick GB/T 11945-1999 | ||
| 13 | Load-bearing concrete perforated bricks | Load bearing concrete porous bric kGB/T 25779-2010 | ||
| 14 | Non-load-bearing concrete hollow bricks | Non-load-bearing concrete hollow brick GBT 24492-2009 | ||
| 15 | Ordinary concrete small blocks | Ordinary concrete small block GB/T 8239-2014 | ||
| 16 | Autoclaved lime sand perforated bricks | Steamed sand porous bric kJC/T 637-2009 | ||
| 17 | Fly ash concrete small hollow blocks | Fly ash concrete small hollow bloc kJC/T 862-2008 | ||
| 18 | Concrete tiles | Concrete til eJC/T 746-2007 | ||
| 19 | Sintered perforated bricks and perforated blocks | Sintered perforated bricks and perforated blocks GB/T 13544-2011 | ||
| 20 | Sintered hollow bricks and hollow blocks | Sintered hollow bricks and hollow block sGB/T 13545-2014 | ||
| 4 | Windows | 21 | Plastic windows for construction | Plastic windows for construction GB/T 28887-2012 |
| 22 | Aluminum alloy doors and windows | Aluminum alloy doors and window sGB/T 8478-2008 | ||
| materials for decoration and decoration | ||||
| 5 | Sealant | 1 | Silicone structural sealant for construction | Silicone structural sealant for construction GB 16776-2005 |
| 2 | Silicone and modified silicone construction sealants | 硅酮和改性硅酮建筑密封胶 GB/T 14683-2017 | ||
| 3 | Building sealant for stone | 石材用建筑密封胶 GB/T 23261-2009 | ||
| 4 | Silicone structural sealant for insulating glass | Silicone structural sealant for insulating glass GB 24266-2009 | ||
| 6 | Sealant | 5 | Elastomeric sealant for building windows | 建筑窗用弹性密封胶 JC/T 485-2007 |
| 7 | Architectural coatings, putty | 6 | Heavy calcium carbonate for the coating industry | 涂料工业用重质碳酸钙 HG/T 3249.2-2013 |
| 7 | Primer for interior and exterior walls of buildings | 建筑内外墙用底漆 JG/T 210-2007 | ||
| 8 | Synthetic resin emulsion sand wall-like architectural coatings | Synthetic resin emulsion sand wall architectural coating JG/T 24-2000 | ||
| Synthetic resin emulsion sand wall architectural coating JG/T 24-2018 | ||||
| 9 | Resilient architectural coatings | 弹性建筑涂料 JG/T 172-2014 | ||
| 10 | Putty for the interior walls of the building | 建筑内墙用腻子 JG/T 298-2010 | ||
| 11 | Putty for building facades | 建筑外墙用腻子 JG/T 157-2009 | ||
| 12 | Synthetic resin emulsion interior wall paints | 合成树脂乳液内墙涂料 GB/T 9756-2018 | ||
| 13 | Solvent-based exterior paints | 溶剂型外墙涂料 GB/T 9757-2001 | ||
| 14 | Synthetic resin emulsion exterior paints | 合成树脂乳液外墙涂料 GB/T 9755-2014 | ||
| 15 | Flexible putty for facades | 外墙柔性腻子 GB/T 23455-2009 | ||
| 8 | Wooden floors | 16 | Hardwood flooring | Solid wood flooring Part 1 Technical requirements GB/T 15036.1-2018 |
| Solid wood flooring Part 2 Test method GB/T 15036.2-2018 | ||||
| 17 | Parquet | 实木复合地板 GB/T 18103-2013 | ||
| 9 | Adhesives | 18 | Ceramic tile adhesive | Ceramic tile adhesive JC/T 547-2017 |
| Metallic materials | ||||
| 10 | Metallic materials | 19 | Steel for reinforced concrete Part 1: Hot rolled round steel bar | Steel for reinforced concrete Part 1: Hot rolled round steel bar GB/T 1499.1-2017 |
| 11 | Metallic materials | 20 | Steel for reinforced concrete Part 2: Hot-rolled ribbed steel bar | Steel for reinforced concrete Part 2: Hot-rolled ribbed steel bars GB/T 1499.2-2018 |
| 21 | High-quality carbon structural steel | High-quality carbon structural steel GB/T 699-2015 | ||
| 22 | Carbon structural steel | 碳素结构钢 GB/T 700-2006 | ||
| 23 | Threaded reinforcement for prestressed concrete | 预应力混凝土用螺纹钢筋 GB/T 20065-2016 | ||
| 24 | Low-alloy high-strength structural steel | Low-alloy high-strength structural steel GB/T 1591-2018 | ||
| 25 | Aluminium building profiles Part 1: Substrates | Aluminum alloy building profiles Part 1: Base material GB/T 5237.1-2017 | ||
| 26 | Aluminium Alloy Building Profiles Part 2: Anodized Profiles | Aluminum alloy building profiles Part 2: Anodized profiles GB/T 5237.2-2017 | ||
| 12 | Metallic materials | 27 | Welded steel pipes for low-pressure fluid transfer | 低压流体输送用焊接钢管 GB/T 3091-2015 |
| Waterproof material | ||||
| 13 | Construction waterproofing membrane | 28 | appearance | Test method for building waterproofing membrane Part 2: Asphalt waterproofing membrane Appearance GB/T 328.2-2007 |
| 29 | Test method for building waterproofing membrane Part 3: Polymer waterproofing membrane Appearance GB/T 328.3-2007 | |||
| 30 | Thickness, mass per unit area | Test method for building waterproofing membrane Part 4: Asphalt waterproofing membrane Thickness, quality per unit area GB/T 328.4-2007 | ||
| 31 | Test method for building waterproofing membrane Part 5 Polymer waterproofing membrane Thickness, mass per unit area GB/T 328.5-2007 | |||
| 32 | Length, width, straightness, flatness | Test method for building waterproofing membrane Part 6 Asphalt waterproofing membrane Length, width and straightness GB/T 328.6-2007 | ||
| 33 | Test method for building waterproofing membrane Part 7 Polymer waterproofing membrane Length, width and straightness GB/T 328.7-2007 | |||
| 14 | Construction waterproofing membrane | 34 | Tensile properties | Test method for building waterproofing membrane Part 8: Asphalt waterproofing membrane Tensile properties GB/T 328.8-2007 |
| 35 | Test method for building waterproofing membrane Part 9: Polymer waterproofing membrane Tensile properties GB/T 328.9-2007 | |||
| 36 | Impermeable | Test method for building waterproofing membrane Part 10 Asphalt and polymer waterproofing membrane impermeable GB/T 328.10-2007 | ||
| 37 | heat tolerance | Test method for building waterproofing membrane Part 11 Asphalt waterproofing membrane Heat resistance GB/T 328.11-2007 | ||
| 38 | Dimensional stability | Test method for building waterproofing membrane Part 12 Asphalt waterproofing membrane Dimensional stability GB/T 328.12-2007 | ||
| Test method for building waterproofing membrane Part 13 Polymer waterproofing membrane Dimensional stability GB/T 328.13-2007 | ||||
| 40 | Low temperature flexibility | Test method for building waterproofing membrane Part 14 Asphalt waterproofing membrane Low temperature flexible GB/T 328.14-2007 | ||
| 41 | Low temperature bendability | Test method for building waterproofing membrane Part 15 Polymer waterproofing membrane Low temperature flexability GB/T 328.15-2007 | ||
| 42 | Chemical Resistant Liquids | Test method for building waterproofing membrane Part 16 Polymer waterproofing membrane resistant to chemical liquids (including water) GB/T 328.16-2007 | ||
| 43 | Tear properties | Test method for building waterproofing membrane Part 18 Asphalt waterproofing membrane Tear performance (nail rod method) GB/T 328.18-2007 | ||
| 44 | Test method for building waterproofing membrane Part 19 Polymer waterproofing membrane Tear performance GB/T 328.19-2007 | |||
| 45 | Seam peel performance | Test method for building waterproofing membrane Part 20 Asphalt waterproofing membrane Joint peeling performance GB/T 328.20-2007 | ||
| Test method for building waterproofing membrane Part 21 Polymer waterproofing membrane Peeling performance of joints GB/T 328.21-2007 | ||||
| 47 | Seam shear performance | Test method for building waterproofing membrane Part 22 Asphalt waterproofing membrane Joint shear performance GB/T 328.22-2007 | ||
| Test method for building waterproofing membrane Part 23 Polymer waterproofing membrane Joint shear performance GB/T 328.23-2007 | ||||
| 15 | Construction waterproofing membrane | 49 | Impact resistance | Test method for building waterproofing membrane Part 24 Asphalt and polymer waterproofing membrane Impact resistance GB/T 328.24-2007 |
| 50 | Resistant to static loads | Test method for building waterproofing membrane Part 25 Asphalt and polymer waterproofing membrane Anti-static load GB/T 328.25-2007 | ||
| 51 | Soluble content | Test method for building waterproofing membrane Part 26 Asphalt waterproofing membrane Soluble content (dipping material content) GB/T 328.26-2007 | ||
| 52 | Absorbent | Test method for building waterproofing membrane Part 27 Asphalt and polymer waterproofing membrane Water absorption GB/T 328.27-2007 | ||
| 53 | Thermal aging | Aging test method for building waterproof materials GB/T 18244-2000 | ||
| 16 | Vulcanized rubber and thermoplastic rubber | 54 | Tensile stress-strain properties | Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber GB/T 528-2009 |
| 55 | Tear strength | Determination of tear strength of vulcanized rubber or thermoplastic rubber (trouser type, right angle shape and crescent type style) GB/T 529-2008 | ||
| 56 | hardness | Test method for indentation hardness of vulcanized rubber or thermoplastic rubber Part 1 Shore hardness tester method (Shore hardness) GB/T 531.1-2008 | ||
| 57 | Liquid resistance test | Vulcanized rubber or thermoplastic rubber Liquid resistance test method GB/T 1690-2010 | ||
| 58 | Hot air aging | Vulcanized rubber or thermoplastic rubber Hot air accelerated aging and heat resistance test GB/T 3512-2014 | ||
| 59 | Artificial climate aging | Vulcanized rubber or thermoplastic rubber Weather resistance GB/T 3511-2018 | ||
| 17 | Architectural waterproofing coatings | 60 | Solids content | Test method for building waterproof coatings GB/T 16777-2008 |
| 61 | Bond strength | Test method for building waterproof coatings GB/T 16777-2008 | ||
| 62 | Tensile strength | Test method for building waterproof coatings GB/T 16777-2008 | ||
| 63 | Heating stretch rate | Test method for building waterproof coatings GB/T 16777-2008 | ||
| 64 | Low temperature flexibility | Test method for building waterproof coatings GB/T 16777-2008 | ||
| 65 | Low temperature bendability | Test method for building waterproof coatings GB/T 16777-2008 | ||
| 66 | Impermeable | Test method for building waterproof coatings GB/T 16777-2008 | ||
| 67 | Drying time | Test method for building waterproof coatings GB/T 16777-2008 | ||
| 18 | building material | 68 | Radionuclide limits | Radionuclide Limit for Building Materials GB 6566-2010 |
| 69 | Artificial climate aging | Test method for accelerated aging of building materials by artificial climate GB/T 16259-2008 | ||
| masonry materials | ||||
| 19 | concrete blocks and bricks | 70 | Dimensional deviations and appearance quality | Test method for concrete blocks and bricks GB/T 4111-2013 |
| 71 | compressive strength | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 72 | Flexural strength | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 73 | Block density and hollow heart rate | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 74 | Moisture content, water absorption, and relative moisture content | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 75 | Drying shrinkage value | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 76 | Softening coefficient | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 77 | Carbonization coefficient | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 78 | Frost resistance | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 79 | Impermeability | Test method for concrete blocks and bricks GB/T 4111-2013 | ||
| 20 | Brick the walls | 80 | Dimensional measurements | 砌墙砖试验方法 GB/T 2542-2012 |
| 81 | Appearance quality inspection | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 82 | Flexural strength test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 83 | Compressive strength test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 84 | Freeze-thaw test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 85 | Bulk density test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 86 | Lime burst test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 87 | Frost test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 88 | Water absorption and saturation coefficient test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 89 | Determination of porosity and pore structure | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 21 | Brick the walls | 90 | Drying shrinkage test | 砌墙砖试验方法 GB/T 2542-2012 |
| 91 | Carbonization test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 92 | Softening test | 砌墙砖试验方法 GB/T 2542-2012 | ||
| 22 | Autoclaved aerated concrete | 93 | Dry density, moisture content and water absorption | Autoclaved aerated concrete performance test method GB/T 11969-2008 |
| 94 | Mechanical properties | Autoclaved aerated concrete performance test method GB/T 11969-2008 | ||
| 95 | Drying shrinkage | Autoclaved aerated concrete performance test method GB/T 11969-2008 | ||
| 96 | Frost resistance | Autoclaved aerated concrete performance test method GB/T 11969-2008 | ||
| 97 | carbonization | Autoclaved aerated concrete performance test method GB/T 11969-2008 | ||
| 98 | Wet and dry cycles | Autoclaved aerated concrete performance test method GB/T 11969-2008 | ||
| Sealing material | ||||
| 23 | Building sealants | 99 | density | Test methods for building sealing materials Part 2: Determination of density GB/T 13477.2-2002 |
| 100 | Extrusion | Test methods for building sealing materials Part 3: Methods for determining the extrusion of sealing materials using standard instruments GB/T 13477.3-2017 | ||
| Test methods for building sealing materials Part 4: Extrusion determination of one-component sealing materials in original packaging GB/T 13477.4-2017 | ||||
| 102 | Surface drying time | Test methods for building sealing materials Part 5: Determination of surface dry time GB/T 13477.5-2002 | ||
| 103 | Sag, leveling | Test methods for building sealing materials Part 6: Determination of fluidity GB/T 13477.6-2002 | ||
| 104 | Low temperature flexibility | Test methods for building sealing materials Part 7: Determination of low-temperature flexibility GB/T 13477.7-2002 | ||
| 105 | Tensile adhesion | Test methods for building sealing materials Part 8: Determination of tensile adhesion GB/T 13477.8-2017 | ||
| 106 | Tensile adhesion after immersion in water | Test methods for building sealing materials Part 9: Determination of tensile adhesion after immersion in water GB/T 13477.9-2017 | ||
| 107 | Fixed-stretch adhesion | Test methods for building sealing materials Part 10: Determination of fixed-tensile adhesion GB/T 13477.10-2017 | ||
| 24 | Building sealants | 108 | Tensile adhesion after immersion in water | Test methods for building sealing materials Part 11: Determination of fixed-stretch adhesion after immersion in water GB/T 13477.11-2017 |
| 109 | Adhesion after tension and compression cycles | Test methods for building sealing materials Part 12: Determination of adhesion after tensile and compression cycles at the same temperature GB/T 13477.12-2017 | ||
| 110 | Adhesion after cold drawing-hot pressing | Test methods for building sealing materials Part 13: Determination of adhesion after cold drawing-hot pressing GB/T 13477.13-2002 | ||
| 111 | Adhesion after immersion and tension and compression cycles | Test methods for building sealing materials Part 14: Determination of adhesion after water immersion and tensile and compression cyclesGB/T 13477.14-2002 | ||
| 112 | Compression characteristics | Test methods for building sealing materials Part 16: Determination of compression properties GB/T 13477.16-2002 | ||
| 113 | Elastic recovery rate | Test methods for building sealing materials Part 17: Determination of elastic recovery rate GB/T 13477.17-2017 | ||
| 114 | Peel adhesion | Test methods for building sealing materials Part 18: Determination of peel adhesion GB/T 13477.18-2002 | ||
| 115 | Mass and volume variation | Test methods for building sealing materials Part 19: Determination of mass and volume changes GB/T 13477.19-2017 | ||
| 116 | Polluting | Test methods for building sealing materials Part 20 Determination of contamination GB/T 13477.20-2017 | ||
| Coatings/putty | ||||
| 25 | Architectural coatings, putty | 117 | Fineness | Particle size analysis Laser diffraction GB /T 19077-2016 |
| 118 | Drying time | Paint film, putty film drying time determination method GB/T 1728-1979 | ||
| 119 | Water Resistance | 漆膜耐水性测定法 GB/T 1733-1993 | ||
| 120 | Flexibility | 腻子膜柔韧性测定法 GB/T 1748-1979 | ||
| 121 | Flexibility test method GB/T 1731-1993 | |||
| 122 | Resistance to artificial weather aging | Pigments and varnishes Climatic aging and exposure to artificial radiation Filtered xenon arc radiation GB/T 1865-2009 | ||
| 123 | Contrast ratio (white or light) | Determination of the ratio of white and light paint GB/T 23981-2009 | ||
| 124 | density | 色漆和清漆 密度的测定 比重瓶法GB/T 6750-2007 | ||
| 26 | Architectural coatings, putty | 125 | Alkali resistance | Architectural Coatings Determination of alkali resistance of coatings GB/T 9265-2009 |
| 126 | Scrub resistance | Architectural Coatings Determination of Scrubbing Resistance of Coatings GB/T 9266-2009 | ||
| 127 | Low temperature stability | Determination of freeze-thaw resistance of latex paint GB/T 9268-2008 | ||
| 128 | The coating is resistant to temperature denaturation | Determination of freeze-thaw cyclic resistance of architectural coatings JG/T 25-2017 | ||
| 129 | Coating stain resistance | Test method for stain pick-up resistance of architectural coating GB/T 9780-2013 | ||
| 130 | viscosity | 涂料粘度测定法 GB/T1723-1993 | ||
| 131 | Visual colorimetry | 色漆和清漆—色漆的目视比色 GB/T 9761-2008 | ||
| 132 | Impact resistance | 漆膜耐冲击性测定法 GB/T 1732-1993 | ||
| 133 | Pendulum damping | 色漆和清漆 摆杆阻尼试验 GB/T 1730-2007 | ||
| 134 | adhesion | 漆膜附着力测定法 GB/T 1720-1979（1989） | ||
| 135 | Cupping test | 色漆和清漆 杯突试验 GB/T 9753-2007 | ||
| 136 | Mirror luster | Pigments and varnishes Determination of 20°, 60° and 85° mirror gloss of pigment paint films without metallic pigments GB/T 9754-2007 | ||
| 137 | Resistant to damp heat | 漆膜耐湿热测定法 GB/T1740-2007 | ||
| 138 | Neutral salt spray resistance | Determination of resistance to neutral salt spray for base coats and varnishes GB/T1771-2007 | ||
| 139 | Non-volatile content | Determination of non-volatile content of base paints, varnishes and plastics GB/T 1725-2007 | ||
| 140 | Resistant to liquid media | Determination of base coat and varnish resistance to liquid media GB/T 9274-1988 | ||
| 141 | Fineness | 涂料细度测定法 GB/T 1724-1979(1989) | ||
| 142 | Coverage | 涂料遮盖力测定法 GB/T1726-1979(1989) | ||
| 143 | heat tolerance | 色漆和清漆—耐热性的测定 GB/T 1735-2009 | ||
| 144 | Flexure test (cylindrical shaft) | 色漆和清漆 弯曲试验(圆柱轴) GB/T 6742-2007 | ||
| 145 | Scratch resistance | Stains and varnishes - Determination of scratch resistance - Part 1: Constant load method GB/T 9279.1-2015 | ||
| 146 | Scratch test | 色漆和清漆 漆膜的划格试验 GB/T 9286-1998 | ||
| 147 | Abrasion resistance | Determination of abrasion resistance of base coat and varnish Rotary rubber grinding wheel method GB/T 1768-2006 | ||
| Plate/metal doors and windows | ||||
| 27 | Wood-based panels and veneered wood-based panels | 148 | Determination of moisture content | Test method for physical and chemical properties of wood-based panels and veneered wood-based panels GB/T 17657-2013/GB/T 17657-1999 |
| 149 | Determination of static bending strength and modulus of elasticity | Test method for physical and chemical properties of wood-based panels and veneered wood-based panels GB/T 17657-2013/GB/T 17657-1999 | ||
| 150 | Impregnation peel properties | Test method for physical and chemical properties of wood-based panels and veneered wood-based panels GB/T 17657-2013 | ||
| 151 | Surface stain resistance | Test method for physical and chemical properties of wood-based panels and veneered wood-based panels GB/T 17657-2013/GB/T 17657-1999 | ||
| 152 | Surface abrasion resistance | Test method for physical and chemical properties of wood-based panels and veneered wood-based panels GB/T 17657-2013 | ||
| 153 | Paint film adhesion | Physical and chemical properties test of paint film on furniture surface Part 4: Adhesion cross cutting determination method GB/T 4893.4-2013 | ||
| 154 | Physical and chemical properties test of paint film on furniture surface Part 4: Adhesion cross cutting determination method GB/T 4893.4-1985 | |||
| 155 | Film hardness | 色漆和清漆 铅笔法测定漆膜硬度 GB/T 6739-2006 | ||
| 28 | Metallic materials | 156 | Tensile test | Tensile tests on metallic materials – Part 1: Test methods at room temperature GB/T 228.1-2010 |
| 157 | Bending test of metallic materials | Metallic materials Flexure test method GB/T 232-2010 | ||
| 158 | Bending test of metal pipes | Metal pipe bending test method GB/T 244-2008 | ||
| 159 | Tensile test, reverse flexure test, weight deviation | Test method for steel for reinforced concrete GB/T 28900-2012 | ||
| 160 | Rebar bending test | Test method for steel for reinforced concrete GB/T 28900-2012 | ||
| 161 | Charpy pendulum impact | Metallic materials Charpy pendulum impact test method GB/T 229-2007 | ||
| 29 | Metallic materials | 162 | Rockwell hardness | Metallic materials - Rockwell hardness test - Part 1: Test method GB/T 230.1-2018 |
| 163 | Cloth hardness | Metallic materials Brinell hardness test Part 1 Test method GB/T 231.1-2018 | ||
| 164 | Vickers hardness | Metallic materials Vickers hardness test - Part 1: Test method GB/T 4340.1-2009 | ||
| 165 | Wechsler hardness | 铝合金韦氏硬度试验方法 YS/T 420-2000 | ||
| 166 | Film thickness | Non-conductive overlay on non-magnetic matrix metal Overlay thickness measurement Eddy current method GB/T 4957-2003 | ||
| 167 | Salt spray test | Detection method for anodized film of aluminum and aluminum alloy Part 3: Copper accelerated acetate spray test (CASS test) GB/T 12967.3-2008 | ||
| 168 | The average grain size of the metal | Method for determining the average grain size of metals GB/T 6394-2017 | ||
| 169 | Flattening test | Metal material tube flattening test method GB/T 246-2017 | ||
| 170 | The quality of the galvanized layer | Test method for the quality of galvanized layer of steel products GB/T 1839-2008 | ||
| 30 | fasteners | 171 | Torque test | Mechanical properties of fasteners: torque test and breaking torque of bolts and screws, nominal diameter 1~10mm, GB/T 3098.13-1996 |
| 31 | Aluminum alloy building profiles | 172 | Tensile test | Specimens and methods for tensile testing of deformed aluminum, magnesium and their alloy processed products GB/T 16865-2013 |
| 173 | chromatic aberration | Detection method for anodized film of aluminum and aluminum alloy Part 6: Visual observation method to test the color difference and appearance quality of colored anodized film GB/T 12967.6-2008 | ||
| 174 | Sealing quality | Aluminum and aluminum alloy anodizing Evaluation method for sealing quality of oxide film Part 1: Acid etching weight loss method GB/T 8753.1-2017 | ||
| 32 | Welded joints for rebar | 175 | tensile strength | 钢筋焊接接头试验方法标准 JGJ/T 27-2014 |
| 176 | Flexure test | 钢筋焊接接头试验方法标准 JGJ/T 27-2014 | ||
| 177 | Shear test | 钢筋焊接接头试验方法标准 JGJ/T 27-2014 | ||
| 178 | Impact test | 钢筋焊接接头试验方法标准 JGJ/T 27-2014 | ||
| 179 | Metallographic test | 钢筋焊接接头试验方法标准 JGJ/T 27-2014 | ||
| 180 | Hardness test | 钢筋焊接接头试验方法标准 JGJ/T 27-2014 | ||
| 181 | Grain size determination | 钢筋焊接接头试验方法标准 JGJ/T 27-2014 | ||
| 33 | Building doors and windows | 182 | Gas-tightness | Classification and testing methods for airtightness, watertightness and wind pressure resistance of external doors and windows of buildings GB/T 7106-2008 |
| 183 | Watertightness | Classification and testing methods for airtightness, watertightness and wind pressure resistance of external doors and windows of buildings GB/T 7106-2008 | ||
| 184 | Wind pressure resistance | Classification and testing methods for airtightness, watertightness and wind pressure resistance of external doors and windows of buildings GB/T 7106-2008 | ||
| 185 | Heat retention performance | Classification and testing methods for thermal insulation performance of building exterior doors and windows GB/T 8484-2008 | ||
| 186 | Mechanical properties | Test method for mechanical properties and weather resistance of unplasticized polyvinyl chloride (PVC-U) plastic doors and windows GB/T 11793-2008 | ||
| 187 | Opening and closing force | Detection method for mechanical force of building windows GB/T 9158-2015/GB/T 9158-2088 | ||
| Door opening and closing force test method GB/T 29555-2013 | ||||
Method for testing the opening and closing force of windows GB/T 29048-2012 | ||||
| 190 | Repeated opening and closing | Durability test method for repeated opening and closing of doors and windows GB/T 29739-2013 | ||
| Repeated opening and closing performance testing method of building doors and windows JG/T 202-2006 | ||||
